Coated CCD detection system

01-涂布CCD檢測系統大圖.jpg

Name	Parameter
Detection speed:	≤120m/min
Detection width:	700mm-1550mm
Resolution:	0.024mm/pix (horizontal); 0.048mm/pulse (vertical)
Dimensional detection accuracy:	±0.1mm
Defect Detection Accuracy:	0.5mm*0.5mm
Detect the number of single-sided strips:	≤4 pieces
Overkill/missing rate:	Misjudgment: 0%, Misjudgment: ≤0.1% GRR≤10% (standard tolerance is ±0.6mm)
The gray scale deviation of defects and coating film needs to meet ≥30
Equipment Dimensions:	Compatible device manufacturers
Inspection content: width, alignment, defects
1) Coating width:	Wet material, dry material (full width, AB surface coating width, blank width, ceramic width)
2) Alignment:	Measure the alignment of the AB side at the station of the A side dry material and the B side wet material.
3) Defect detection:	Dirt, surface damage, scratches, streaks, bubbles, leaking metal.
Applicable process:	Extrusion, transfer, gravure
1) Coating process:	Continuous coating, stripe coating, intermittent coating and intermittent stripe coating.
2) Product process:	Compatible with AT9 and concave board